News RSS

 Indianapolis #1 Round 4, 01/30/2021 88- Logan Karnow Qualifying Position: 14 It was a solid day overall for Logan. He quickly charged the track in practice and qualifying and secured a 14th place in qualifying which would give him a good gate pick for his heat. As the gate dropped for the heat, Logan inched around the inside of turn one and came out inside the top 10. He rode a smart race and charged the entire time to finish 6th and transfer directly to the main. Unfortunately, a freak incident occurred while Logan and his mechanic were on the...

Round 3 Houston, Texas January 23, 2021: 88- Logan Karnow Qualifying Position: 13 Logan had an eventful day to say the least. He began the day strong and once again set a fast pace in qualifying where he would end up 13th fastest. Karnow would get 7th gate pick in Heat #1. He chose an inside gate for the unique right handed first turn. He fired off the gate and hugged the inside to capture the hole shot. Karnow carried the lead through almost a complete lap but unfortunately right before the finish line a costly mistake coming out of...

The Ronnie Prado Company, Jones Powersports, Proverbial Contracting Kawasaki team with 450 SX rider Scotty Wennerstrom is excited to get the season started in their home state of Texas! A great venue with great dirt set the stage for the first opening round outside of California in 20+ years!  “Super excited to have the first 3 rounds in Texas for the start of the season” said Scotty who is a native Texan. Houston 1 recap: An easy designed track turned treacherous quickly at round 1 with lots of moisture in the dirt. After struggling with the longest rhythm section on...

September 27th, 2020Offroad Support/TBT rider Jacob Argubright lined up for round five of the AMA National Hare and Hound Championship series in Jericho, Utah for the 80-mile natural terrain off-road race hosted by Sage Riders MC. Following his return to the podium at round four in Nevada, Argubright came in with confidence to repeat his performance. The one-day event on Saturday saw moderate temperatures and a light breeze to help with the drier than normal conditions. Lining up on the FMF Start Line, Argubright carefully chose his line that would hopefully lead him to the end of the bomb with...

How do I install tear-offs? Installing tear-offs only involves a couple of steps, and it starts with ensuring your goggles are clean and that there is no sand or moisture on the lens.  Step 1: Placing your tear-off on the goggles The first step to installing a tear-off is a case of aligning the holes in the tear-off with the tear-off posts on the goggles, and then simply pushing the tear-off so it sits on the lens. Ensure the pulling tab of the tear-off is on the left-hand side. Following that, most goggles will have an additional post on the...